Tuesday, August 20, 2013
2010 IFMAR 1/12th scale World Championships - A-Main
2010 IFMAR 1/12th scale World Championships A-Main Leg 1 followed by Leg 2.
...
Tuesday, July 30, 2013
Sunday, July 28, 2013
Sunday, July 21, 2013
R12c left hub
R12c introduced a new left hub that served as a counter weight on the left. The new hub (r12-24hlc) is about 8g as compared to the older hub (r12-24hl2) that is 4g.
There is also the hub that come with the original r12 kit (r12-24hl) which i really don't like, because the screw to secure the hub is also near the wheel screws. This caused great inconvenience to remove the hub that you have to remove the wheel first.
Thursday, March 28, 2013
kimbrough diff gear and diff cover
I always love the kimbrough differential spur gear for 1/12 pan car mainly for two reasons. Kimbrough spur is a little soft and flexible, this reduces noise & wear on the pinion. But the most wonderful feature of Kimbrough spur is the diff cover. The white diff covers snapped on the diff gear, prevent dirt from getting into the diff and reduce the need to rebuild the diff.
Check out. http://kimbroughracingproducts.com/store/index.php?dispatch=products.view&product_id=29920
Check out. http://kimbroughracingproducts.com/store/index.php?dispatch=products.view&product_id=29920
Raceworks round 2 1/12 pan car race
Round 2 of the raceworks 1/12 pan car race was interrupted by rain AGAIN. For some strange reason, it wasn't raining the day before and after the race. And by accident, I came in third in A-Main, because the result were taken from qualifying rounds instead. Happy to have the first RC Car trophy but nevertheless, will strive for better result next round.
My pit table.
Tuesday, January 29, 2013
RayTek MT4 Temperature gun
Monday, January 21, 2013
raceworks 1/12 race
Finally get to participate in a race. Unfortunately the weather wasn't good and it started to race after round 1 of the main. While I was qualified on the 5th position, I only came in 4th. consider as last because the rest of the racer left before the race ended. Hopefully the next race will be better.
My bodyshell for the race.
yokomo r12
My current Yokomo R12.
Just recently modified to use World Conversion Chassis R12-WCONV.
TX/RX: MT4/RX-471
Servo: JR Z3650
ESC : Viper VTX1
Motor : D3.5, 4T
Gear: 96/26
Subscribe to:
Posts (Atom)